XACT PRO COMPONENTS
XACT PRO
FORKS
WP’s Pro Component line is designed with pure performance in mind and prioritizes control for higher speeds and bigger impacts over initial compliance and comfort. For the rider looking for the next step in performance, the WP Pro Component line offers a sense of confidence that can take your riding or racing to the next level. The closed cartridge design rewards sustained aggression and must be ridden accordingly to provide the best benefit to the rider. If you are considering WP’s Pro Components give us a call to talk through our personal experience and R&D.
variants
XACT PRO 7548 - Closed Cartridge with Coil Springs.
XACT PRO 7448 - Closed Cartridge with Air Spring.
fitment
KTM, Husqvarna, and GasGas Motorcycles with XACT / AER48 forks.
BASELINE PRICING
$3,499 USD
Revalve: $295 USD (labor & tuning parts)
Dyno Verification: $180 USD
Pro Components for most KTM / Husqvarna / GasGas models are IN STOCK
XACT PRO
SUPERTRAX SHOCK
The XACT PRO SUPERTRAX shock features an updated version of the Trax mechanism used in previous Pro Component shocks. Supertrax reduces rebound damping when the rear wheel is off the ground, helping the tire get back to traction as quickly as possible.
features / benefits
Externally adjustable Supertrax mechanism - infinitely easier to use and understand than previous generation.
High-end construction - dramatic reduction in friction compared to OEM components.
Nitrogen bladder instead of an Internal Floating Piston (IFP) — this has advantages (lower friction) and disadvantages (requires more frequent service) compared to WP’s traditional piston separator setup.
Separate high-speed and low-speed compression adjusters - instead of a concentric dual compression control (DCC) found on OEM shocks.
Rebound separator valve, which isolates compression and rebound adjustments, and increases low speed compression damping at the mid-valve (which can aid in pressure balance).
fitment
KTM, Husqvarna, and GasGas Motorcycles with XACT shocks
BASELINE PRICING
$2,249.00 USD
Revalve: $295 USD (labor & tuning parts)
Dyno Verification: $180 USD
Pro Components for most KTM / Husqvarna / GasGas models are IN STOCK
Technical Overview
what are pro components?
WP's Pro Components line is aftermarket suspension designed for riders who want the highest quality components and are willing to pay a premium.
Pro Components are manufactured to tight tolerances using high quality materials, fine surface finishes, and low-friction coatings. These improvements reduce friction compared to OEM suspension components, and is perhaps their most significant advantage. In fact, to achieve a similar feeling of stiffness to OEM suspension, all Pro Components required much stiffer damping. The additional “stiffness” in the OEM components is due to the additional friction. Friction is perhaps the one thing in suspension where no compromise is involved: less friction is always better. When setup appropriately for the rider, Pro Components can deliver high confidence at high speeds.
tuning
Like any suspension hardware, Pro Components depend entirely on setup. The best parts in the world can’t make a poor or mismatched setting perform well. Think of it as hardware and software, where suspension components are the hardware, and the valving, springs, and air gap are the software. One can’t work without the other. Kreft Moto is experienced with WP’s range of recommended setups, as well as customized versions based on our own testing. Our experience enables us to make the most of your Pro Components purchase.
dyno verification
Kreft Moto puts every WP Pro Component through our dyno verification process. The dyno allows us to compare your specific components to a known baseline, and adjust your setting as needed to match a target outcome precisely. This additional quality control step ensures we deliver the absolute best possible Pro Component suspension.